16
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
RX video display
Standard ALIF (1002) units support one
Single Link video display at pixel clocks
up to 165MHz (equivalent to a maximum
resolution of 1920 x 1200 at 60Hz).
All ALIF dual units can simultaneously
support up to two Single Link high
resolution video displays at pixel
clocks up to 165MHz (1920 x 1200 at
60Hz maximum). ALIF2000 units can
alternatively support a single Dual Link very high Resolution video display at pixel clocks
up to 330MHz (equating to an example display mode of 2560 x 1600 at 60Hz).
2 (ALIF dual only) If required, connect the lead from the second video display to the DVI-D-2 socket on the RX unit rear panel.
To connect video displays
1 Connect the lead from the primary video display to the DVI-D-1 (DVI-D on ALIF 1002 models) socket on the RX unit rear panel:
DVI-D-2
DVI-D-1
USE
R CO
NSO
LE
DVI-D-2
DVI-D-1
USE
R CO
NSO
LE
VSCD3 cable
to primary
video display
When using two single link DVI-D displays, connect an
additional video cable to the DVI-D-2 port of the RX unit.
To
secondary
video display
To primary
video display
ALIF (1002)
ALIF dual
ALIF dual
To video
display
Note: When using dual link on DVI-D-1 (not ALIF2020), the DVI-D-2
port will be disabled. If DVI-D-2 is already being used, then it must
be disconnected before dual link operation can occur on DVI-D-1.