7
WWW.ADDC.NET | 516.673.4444 | [email protected] | ALL PRODUCTS ARE PROUDLY MADE IN THE USA
Section 2.2 - Installing Your SR-20RM into a Rack
A.
B.
The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two
sections: an inner fixed chassis rail that secures directly to the server chassis and an outer fixed rack rail
that secures directly to the rack itself.
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the
floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip
over and cause severe injury to the technicians and damage to the device.
This section provides information on installing the SR-20RM chassis into a rack unit with the quick-
release rails provided.
Mount Rack Slides on the
SR-20RM
Inner and outer chassis rails are shipped together, before continuing please seperate outer rail from
inner rail.
Attached the inner rails to the
server rack .
Once done, slide the SR-20RM
onto the server rack.
