ADC ECOWASH-MP2, Руководство пользователя и по обслуживанию, Страница: 29 / 34

113688- 1 29
After selecting CHANGE BLOCK, press the ENTER key
and the number of the first available block will be
displayed with its corresponding text:
With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys, the number of the
source block is selected. Press ENTER. and the block
text is modified:
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to modify the
character indicated by the cursor; use the ADVANCE
(>>) key to move the cursor to the next character. Press
ENTER to validate the selection.
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to modify the
parameter values; use the ADVANCE (>>) key to move
the cursor to the next parameter. Once all the
parameters have been modified, press ENTER.
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.6 PROGRAM
After pressing the ENTER key we have four options:
4.6.1 Create program
This command allows for a new program to be created.
The steps to follow are the following:
After selecting CREATE PROGRAM, press the ENTER
key and the lowest program number to be created will
be displayed: With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys, the
program number is selected.
CREATE PROGRAMME
Programme:
21
Program name
WHITES 90 °C
WHITES 90 °C
Cycle:
1
Pre-wash
Block:
CHANGE BLOCK
Block:
35
Washing
CHANGE BLOCK
Text block:
Washing
CHANGE BLOCK
Block:
39
Washing
Stop program
No.
Save block?
CREATE PROGRAM
COPY PROGRAM
CHANGE PROGRAM
ERASE PROGRAM
CREATE PROGRAM
Programme:
17
Once the program number has been selected, press
ENTER and the first available name will be displayed:
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to change between
names. Once the name has been selected, press
ENTER and the first available cycle and name will be
displayed:
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.6.2 Copy program
This command allows a program to be copied from an
existing one. The steps to follow are the following:
After selecting COPY PROGRAM, press the ENTER
key and the lowest destination program number will be
determined:
With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys, the number of the
block is selected. Press the INFO key to view the
parameters of this block. Once this number has been
selected, press ENTER and the number of the following
cycle will be displayed with the first available name.
Proceed, as many times as necessary, as above to
name the cycles and select the block numbers. To end,
press ESC
COPY PROGRAM
Dest. programme (17)
Save program?
BLANKETS
BLANKETS
SPIN
Block:
1
Pre-wash 40 °C
With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys the cycle name is
varied. Once this name has been selected, press
ENTER and the first available block will be displayed: