ADC ECOWASH-MP2, Руководство пользователя и по обслуживанию, Страница: 28 / 34

28 113688- 1
4.5.17 Dosing time
Indicate the additive n dosing time (up to 7 additives)
during the filling of the tub. The possible options are:
0
: the dosing is not carried out.
1 to 99 sec. in steps of 1: dosing time in seconds.
4.5.18 Start dosing
This determines when to start the dose time of additive
n, possible options include:
Dose level: Dosing starts on reaches a minimum safety
level (60 mm).
Fill level: Dosing starts on reaching the level programd
for this block.
Temp programd: Dosing starts on reaching the
temperature programd for this block.
4.5.19 Delay
This is the time taken between the detection of water in
the tub and the start of dosage of additive n. Possible
values include:
0 to 99 sec. in steps of 1 sec : delay time in seconds.
Once all the parameters to be introduced are known,
we return to the main programming menu.
PROGRAM NAME
CYCLE NAME
→
BLOCK
PROGRAM
CREATE BLOCK
COPY BLOCK
CHANGE BLOCK
Save block?
After pressing the ENTER key we have three options:
4.5.20 Create block
This command allows for a new block to be created.
The steps to follow are the following:
After selecting CREATE BLOCK, press the ENTER key:
CREATE BLOCK
Block: 35
Press ENTER
CREATE BLOCK
Text block:
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to modify the
character indicated by the cursor; use the ADVANCE
(>>) key to move the cursor to the next character. Press
ENTER to validate the selection.
CREATE BLOCK
Block:
35
wash
Stop program:
NO
Use the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys to modify the
corresponding parameter value; use the ADVANCE (>>)
key to move to the next parameter. Once all the
parameters have been created, press ENTER.
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.5.21 Copy block
This command allows for a block to be copied from an
existing one. The steps to follow are the following:
After selecting COPY BLOCK, press the ENTER key
and the number of the first block saved in the memory
will be displayed with its corresponding text as well as
the number of the destination block:
COPY BLOCK
Dest. block: 35
With the INC (
∧∧∧∧∧
) and DEC (
∨∨∨∨∨
) keys, the number of the
source block is selected. Press ENTER
Save block?
ENTER: Accept / ESC: Cancel / <<: Previous menu
4.5.22 Change block
This command allows for all the parameters of a block
to be modified amongst those created by the user. The
steps to follow are the following:
Press ENTER
COPY BLOCK
Block 1
Pre-wash 40 °C