NOTE:
If one of the measurements causes an error message, it will be repeated one more time. If any
6.
additional error occurs, the measurement will be discontinued and an error code will be displayed.
Expanding the averaged measurement to see the three individual readings: This function
allows you to view the three individual measurements used to calculate the ADC®
Averaging Mode Technology™ measurement. After taking an averaging mode
measurement turn unit off, hold the Memory button for 3 seconds until you hear a short
beep. (Do not hold the button longer than 7 seconds or you will delete all the readings in
the memory!) Let go of the button and watch the screen. It will automatically scroll through
the three measurements used in the measurement.
6.5. Discontinuing a Measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g. the patient feels unwell),
the «
ON/OFF
» button can be pressed at any time. The device immediately lowers the cuff pressure
automatically.
6.6. Reading Measurement Results:
When the measurement has been concluded, the measured systolic and diastolic blood pressure values, as
well as the pulse will be displayed.
The appearance of this symbol signifies that an irregular heartbeat was detected. This indicator is only
a caution. It is important that you be relaxed, remain still and do not talk during measurements.
NOTE:
We recommend contacting your physician if you see this indicator frequently.
To prolong the batteries’ life the device switches off automatically if no button is pressed for 2 minutes.
Otherwise you can switch it off by pressing the «
ON/OFF
» button.
7. SOFTWARE FUNCTIONS (6016N ONLY)
7.1. ADC® Advanced PC Link Software Installation and Data Transmission
(Software sold separately, Order Item #6023NPC)
This unit can be used in connection with your personal computer (PC)
running the ADC® Advanced PC Link Software. Your PC will allow a
capacity of monitoring 80 patients, each with 1000 records of data
(Note: Overuse will lower system efficiency). The memory data (except
average values) can be transferred to the PC by connecting the monitor
via the included USB cable with your PC. Note: The software does not work with Mac computers.
Insert CD into CD ROM drive of your PC. The
1.
installation will start automatically. If not, click on
SETUP.EXE.
Connect the monitor via USB cable with the PC. Three
2.
horizontal bars will appear on the display and last for
3 seconds.
The bars will then flash to indicate that the connection
3.
between computer and device is successfully made.
As long as the cable is plugged, the bars will keep
flashing and the buttons are disabled. During the
connection, the device is completely controlled by the
computer. Refer to the ‘Help’ file in the software for
detailed instructions.
6
0
1
6
N
M
o
d
e
l
O
n
l
y