ADC ADCP-75-237, Руководство пользователя

Страница: 10 / 36

ADCP-75-237 • Issue 1 • 8/2007 • Preface
Page x
© 2007, ADC Telecommunications, Inc.
radio communications.
Changes and modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commissions rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio & television reception.
ETL : This equipment complies with ANSI/UL 60950-1 Information Technology Equipment.
This equipment provides the degree of protection specified by IP24 as defined in IEC
Publication 529. Ethernet signals are not for outside plant use.
FDA/CDRH : This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This
product conforms to all applicable standards of 21 CFR Part 1040.
IC : This equipment complies with the applicable sections of RSS-131. The term “IC:” before
the radio certification number only signifies that Industry Canada Technical Specifications
were met.
Wind Loading : The NXD RAN is able to withstand wind loads up to 150 mph.
LIST OF ACRONYMS AND ABBREVIATIONS
Below is an example of a list of this type.
The acronyms and abbreviations used in this manual are detailed in the following list:
AC Alternating Current
ANT Multiband Antenna
BIM Base Station Interface Module
BTS Base Transceiver Station
C Centigrade
CDRH Center for Devices and Radiological Health
C/MCPLR Cellular SMR Multicoupler
CM Centimeter
cPCI CompactPCI
CPU Central Processing Unit
CXD Compact RAN
DAS Distributed Antenna System
dB(FS) decibals (Full Scale – digital reading)
DC Direct Current
Div Diversity
EMS Element Management System
ESD Electrostatic Discharge
F Fahrenheit