ADC 150-1592-11, Руководство пользователя

Страница: 28 / 74

Provisioning the HRU-402 150-402-111-02
20 December 8, 1998 HRU-402 List 1A
P
ROVISIONING THE
HRU-402
The HRU-402 can be provisioned by accessing system settings screens
through the RS-232 Craft port at the HLU (or at the HRU if remote
provisioning is enabled). System settings are stored in Non-Volatile Random
Access Memory (NVRAM) of the HLU, meaning the data is retained even
when power is lost or turned off.
C
ONNECTING TO A
T
ERMINAL
E
MULATOR
This section covers the remote terminal screens for both non-doubler and
doubler applications. Once connected, you can access the Remote Terminal
menu.
Figure 7. DB-9 and DB-25 RS-232 I/O Interfaces
As shown in Figure 7 , the 9-pin craft port (RS-232 DB-9 connector) on the
HRU-402 front panel allows you to use a RS-232 cable to connect your
HRU-402
Optional setup
DB-9 Connector
(DCE)
RD (Receive Data)
TD (Transmit Data)
2
3
5
DB-9 Connector
(DTE)
DB-25 Connector
(DTE)
Maintenance Terminal
Maintenance Terminal
2
3
5
2
3
7
GND