L-862S Stop Bar Elevated Light
96A0246 Rev. G
Installation
© ADB Airfield Solutions All Rights Reserved
12
2.3.6 Light Fixture
Installation
Figure 3:
L-862S Light Fixture Assembly
To install the L-862S light fixture, perform the following procedure:
1. See Figure 3. Put the L-823 cordset (7) through the frangible column (6).
2. See Figure 2. Insert the L-823 male plug (9) into the secondary female plug (8) from the L-
830 transformer (7).
3. See Figure 3. Screw the frangible column (6) into the female thread on the L-867 base
plate (8).
CAUTION
See Figure 3. Do not tighten the hex nuts (10) and hex bolts (9) until the frangible column (6) is
threaded into the L-867 light base flange (8). If you attach the slip fitter (5) to the frangible column
(6) before threading the frangible column into the light base (8), you may twist the cordset (7) off
the socket or break the socket prongs. Refer to “Base Mounting” on page 9 and “Optional Stake
Installation” on page 14.
1. Spacer
5. Slip Fitter
9. Hex Bolts
13. Screw
2. Lamp Retaining Bracket
6. Frangible Column
10. Hex Nuts
14. Gasket
3. Back Door
7. L-823 Cordset
11. Lens
15. Reflector
4. Lamp
8. Base Plate
12. Lens Retaining Ring
16.
1
2
4
3
5
6
7
11
13
12
8
9
10
14
15
