7
Setting up your Remote Control
Before you can use your Remote Control for additional functions such as your TV or DVD Player, you will
need to insert a programmable code into the Remote by doing either the Quick Search or a Manual
Entry. These codes are located in the Remote Control User’s Guide that was included in the packaging
of the Remote Control and are listed by brand and model of your device.
Quick Search Set-Up
Use the following steps to program your TV into your Remote Control.
1.
Turn on your TV.
2.
Press the TV button once.
3.
Press the RCU SETUP button until the TV button blinks twice.
4.
Enter 991 by using the number pad. (The TV button should flash two times. If the TV button
emits one long flash, repeat steps 2 through 4.)
5.
Press and release the CH + button continuously until your TV turns off.
6.
Press the POWER button and then the RCU SETUP button once to lock in the code.
7.
To make sure your device has been programmed correctly, point the Remote Control at your
TV and press the POWER button once.
Manual Set-Up
Use the following steps to program your Remote Control.
1.
Turn on the device that you wish to program into the Remote Control.
2.
Find the 4-digit code found in the Remote Control User’s Guide.
3.
Press the button (TV, AUD, DVD, AUX, or STB) on the Remote Control
4.
Press the RCU SETUP button until the device button blinks twice.
5.
Enter the 4-digit code by using the Number Pad (The selected button should flash two times. If
the selected button emits one long flash, repeat steps 2 through 6.)
6.
To make sure your device has been programmed correctly, point the Remote Control at your
device and press the POWER button once.
7.
Once you have successfully programmed your device, note the code for future reference.
8.
Repeat process to program another device.
Powering Devices
1.
Is your device programmed into your Remote Control? (If so, continue to step 2. If not, refer to
the above steps in Programming your Remote Control.)
Содержание 2500W
Страница 6: ...6 Remote Control Guide ...
