28
4.
Using the directional arrows, highlight reminders and press OK
Enabling/Disabling Caller ID
If you have the Caller ID feature from WT Services you are able to allow the Caller ID to show up on the
TV screen when you receive an incoming call. If you do not have the Caller ID feature and would like it
please contact our Office at (806)360-9000 to get it added on your account.
To enable Caller ID:
1.
Press the Menu button on your Remote Control.
2.
Using the directional arrows, highlight Settings and press OK.
3.
Using the number pad enter your password and press OK.
4.
Using the directional arrows place a checkmark in the box next to Enable Caller ID.
5.
Using the directional arrows, highlight Caller ID Timeout located second from the bottom of the
menu on the right side. This allows you to set how long you would like the Caller ID information
to remain on the TV screen. To select, highlight the field and press OK.
6.
You will see two arrows, one on each side of the field. Using the directional arrows press the left
or right arrows to set the time. Time ranges from 5 second up to 45 seconds in 5 second
increments.
7.
Once you have found your desired time press OK.
8.
Using the directional arrows, highlight Submit and press OK.
9.
Your Caller ID is now enabled!
10.
To disable Caller ID,
follow steps 1 through 3 and remove the checkmark from the box.
Viewing a History of Incoming Calls
If you have received any incoming calls, you can view the caller’s information by:
1.
Pressing the Menu button on your Remote Control.
2.
Using the directional arrows, highlight My Library and press OK.
3.
You will see the following options:
a.
Video
b.
PPV Events
c.
Pay Per Block
d.
Sports Packages
e.
Reminders
f.
Messages
g.
Caller ID
4.
Using the directional arrows, highlight Caller ID and press OK.
Содержание 2500W
Страница 6: ...6 Remote Control Guide ...
