MAIN SWITCH ON/OFF
Nb! To completely switch off the VV70CDH use the rocker switch on the underside
of the heater body.
CONTROL PANEL
The functions are ready to use when the ON/OFF touch control on the display
is activated. The symbols will light up depending on what functions are activated.
In standby mode only the symbol ( ) will be visible in the display.
One minute after activation any function the display will dim the symbols.
ON/OFF -
Repeatedly pressing the «ON/OFF» will activate or turn the heaters
functions.Upon entering “ON” mode the fan heater will remain on the last
selected power. When the symbol ( ) is lit the VV70CDG is in standby modus.
NB! To fully switch off the appliance use the rocker switch under the heater
body into 0 (OFF). The power plug should be disconnected from the socket.
HEATER
- By repeatedly pressing “HEATER” the power will switch between
LOW (1200W) and HIGH (2000W)
SWING
- By repeatedly pressing “SWING” the heater will start or stop oscillating.
TIMER
- By repeatedly pressing “TIMER” the heater will run for 1,2,4 or 8 hours
before automatically switching off. Further pressing “TIMER” cancel this function.
REMOTE CONTROL
Remove the plastic protection to activate the remote control.
The signal range is appr. 3-5 meter with a spread of about 30 degrees.
ON/OFF -
Repeatedly pressing the «ON/OFF» will activate or switch
between the different functions. Upon switching “ON”, the heater will
remain on the last selected power setting.
HEATER
- This function alternates between “LOW” and “HIGH” power settings.
SWING
- This function turns the oscillation on or off.
SHIFT
- By repeatedly pressing “SHIFT” the heater will run for 1, 2, 4 or 8 hours
before automatically switching off. Further pressing “SWITCH” cancel this function.
Содержание VV70 CDH
Страница 17: ......