COMPONENT DESCRIPTION
1
、
Handle
2
、
Thermostat knob
3
、
Power setting knob
4
、
Air outlet grill
5
、
Base
6
、
Swing switch
7
、
Air inlet
8
、
Power supply cable
POWER SETTING KNOB FUNCTIONS
By rotating the knob counter-clockwise to "fan" position, the PTC element
will be OFF, and fan only will be running.
Rotate the knob to "0", then the appliance stop working.
Clockwise rotate the knob to "1200W", then the device start working
in lower power mode = 1200 watt.
Clockwise rotate the knob to "2000W", then the device start working
in high power mode = 2000 watt.
Attention: If the knob is turned to "2000W" or “fan” mode, further rotating
will cause damage to the knob function and make the appliance damaged.
THERMOSTAT FUNCTIONS
Clockwise rotate the knob clockwise to the maximum setting. At the time you have reached
the temperature that you want, turn the knob counter-clockwise to the point where the
heater stop working and then a small degree clockwise. The device would maintenance the
set temperature automatically at this level when in operation.
Temperature adjusting knob should be turned within the effective range only. Any attempt
to force the thermostat outside the normal temperature range will damage.
USING SWING SWITCH (6)
Press swing switch (6), the device will start oscillation.
Press this switch again, the heater will stop oscillation.
