Now push and hold “OK” for 5 seconds to store your
programming schedules.
The heater will return to the set temperature, e.g 22.
Now push > to show “Np”. Push > again to show “P1” then
push “OK” once. The green light will now illuminate on the
screen to show the programs are now active.
The Neo S5 can be manually adjusted whilst it is running a
programmed schedule. If you want more or less heat simply push
the + or – button to set the new required temperature. A green
light will flash to show the schedule has been manually overridden.
The Neo S5 will revert to schedule at the next on/off period.
Pushing the > button when the heater is in program mode will enter
the menu. P1 > P2 > P3 > OF > Np.
You can only run one program mode at a time so it is best to set
everything in P1. OF will turn the heater into complete standby. This
will remember your settings but not allow the heater to turn on/off.
It is ideal for a holiday setting. nP denotes “no program” and will
allow you to use the heater manually or with an external
programmer, such as our PR-1 wireless remote programmable
room thermostat.
I hope these instructions are easy to follow and help you with you
initial setup of the Neo S5 electric heater.
