103.146UK User Manual
Introduction
Thank you for choosing the S460-WIFI internet radio streaming amplifier as part of your
background music system. The wireless connectivity of this product brings together online
audio content and smart phone app control for almost unlimited playback possibilities.
Front panel
Rear panel
Connections and Setting Up
Position the S460-WIFI on a stable surface within clear reception of the local WiFi signal and where
controls and connections are accessible.
With the unit switched off, connect to the mains supply using the IEC lead provided (19)
Supplied with the amplifier are 2 antennas. Both of these need to be connected to the SMA sockets on
the rear of the amplifier, labelled
“
BT ANT
”
and
“
WIFI ANT
”
(15, 16) to enable clear reception of
Bluetooth and WiFi signals.
The S460-WIFI amplifier can also play mp3 tracks stored on a USB pen drive, which should be inserted
into the USB port on the front panel (3). Note: this USB port is not suitable for charging smart phones.
1. Power on/off switch
6.
Play/Pause (hold for Bluetooth pairing)
2. Input source LED indicators
7.
Previous track (hold for volume up)
3. USB port (for USB stick only)
8.
Input select (WPS or hold for reset)
4. IR remote control receiver
9.
Output 1 L+R volume control
5. Previous track (hold for volume down)
10. Output 2 L+R volume control
11. Auxiliary line input (L+R RCA)
16. WiFi antenna (SMA connector)
12. Channel 1 line output (L+R RCA)
17. Channel 1 speaker output (L+/-, R+/-)
13. Channel 2 line output (L+R RCA)
18. Channel 2 speaker output (L+/-, R+/-)
14. RJ45 LAN connector
19. IEC mains inlet & fuse holder
15. Bluetooth antenna (SMA connector)
