Adast Systems AdBlue V-line 47 Series, Руководство пользователя

Страница: 18 / 46

USER’S MANUAL V-line AdBlue
®
47xx.xxx
14
8.2. Puting of AdBlue
®
dispenser to OFF mode

Switch off power feed in filling station main terminal.
8.3. New reseting of AdBlue
®
dispenser into operation after power supply failure

After power supply failure or voltage fluctuation will stay data on display about the price and volume
of last provided transaction since interval of last time of nozzle hang out.

In case if power supply happened during of medium tanking , the nozzle has to be hang in (on the
display will stay value of the volume and price) and cash in the amount shown on the display.

By renewing of power supply is the electronic counter in operation mode and another delivery can be
made by hang out of the delivery nozzle.
ATTENTION!
After puting into operational mode in expected low temperature period (T
amb.
) under 0 °C, the
rating must be turned ON permanatly. This is obligation even in „Out of order“ mode.
Termostat of heater to be set on value +5 °C!!
9. OPERATION
By hang out of delivery nozzle the connecting switch controlled by magnet placed in nozzle boot will start
the electronic couter of AdBlue
®
dispenser, will be made reset of the display after it the connecting of
pump elektromotor and mening of electromagnetical valve placed in hydraulic vave of AdBlue
®
dispenser (if
installed).
By AdBlue
®
dispenser for pressurre sytem will be switched in of pump elektromotor placed in container tank
imediatelly after hang out of the nozzle (before providing of test and display reset). Electromagnetic valve
is open after providing of test and display reset.
After placing of delivery nozzle spout to the vehicle tank and push of nozzle lever the tanking is started
(medium delivery). The vehicle tank must be equipped by magnetic adaptor (like ELAFIX 40) to allow the
spout open.
Delivery speed is controlled by nozzle lever (pus hor repase). When the dispensing is finished, the nozzle is
placed out from vehicle tank input and placed to the nozzle boot of DU will be by magnetic switch to
dissconection of power feed to submersible pump.
The records of last dispensing will stay displayed untill next one delivery.
The delivery nozzle is controlled as per instructions shown in enclosure no. 4 of this manual.
10. FUNTION OF MANAGER AND SERVICE KEYBOARD
The KL-MANINF (as pic. 4)manager keyboard and the KL-SERINF (as pic. 5)service keyboard are delivered
as a design with infrared wireless transmission IR. These device are delivered as option.
IR KL-MANINF manager keyboard
The keyboard enables the setting of unit prices and the situation display of electronic totalizers.
The manager keyboard is equipped with four keys marked „
0 “, „ + “, „ – “ and „ R “. The „ 0 “ key is used for
the transition to the "setting of unit prices for MAN" and for the termination of any function executed on
the manager keyboard.
The „
+ “ and „ – “ keys are used for proper setting of the unit price values or for the transition to the mode
of "situation display of electronic totalizers".
The „
R “ key is used for check of vapour recovery exhaustion.
IR KL-SERINF service keyboard
The keyboard enables the counter setting and the keying of values for electronic calibration of meters and
ATC, the situation display of electronic totalizers, setting of unit prices and setting the vapour exhaust
recovery.
The service keyboard is fitted with four keys, „
0 “, „ + “„ – “ as a standard and the " S " key as an extra key.
The " S " key is used for the transition to the mode of "the data setting / calibration".
If the " S " key is not used, the service keyboard can be used for all functions controlled by the manager
keyboard and the keying is identical with that of the manager keyboard.