adapx Capturx, Руководство пользователя

Страница: 4 / 18

Page 2 Rev. 06-12 Capturx Pen Manager 3.5 and Digital Pen User Guide
Changing Ink Cartridges
From time to time, you will need to change the ink cartridge of your digital pen.
1. To remove the ink cartridge from the pen, use small pliers or use the hole in the pen cap to grab
the ink tip, angle the cap, and pull.
2. To place the cartridge in the pen, take one of the ink cartridges and gently slide it into the hole at
the tip until it is completely seated and does not fall out. It’s normal for the cartridge to feel
slightly loose.
Installing Capturx Pen Manager
Before you set up and use the digital pen, you must install the Capturx Pen Manager software.
For Capturx Forms Service:
1. To download Capturx Pen Manager, go to the Capturx Forms Service Resource Center on your
Capturx site.
2. In the Client Software section, click on Capturx Pen Manager .
3. At the prompt, select Open . Follow the instructions to complete installation.
For other Capturx software products:

Install Capturx Pen Manager from the product CD, register the Capturx software product, and
activate the digital pen. For additional help, contact Adapx Technical Support at
techsupport@adapx.com .
NOTE: Although the user interface is in U.S. English, Capturx Pen Manager can install and run on any
Windows-supported locale.