&KDSWHU/*'76(783LQ'HWDLO
Controller firmware (which are the same for both firmware versions: Standard and
RAIDYNE). For the user's convenience the GDTSETUP program is available in two different
variants:
GDTSETUP loaded from the ICP Controller's Flash-RAM after switching on the computer
GDTSETUP loaded from disk under MS-DOS.
The header of the GDTSETUP program indicates with a letter after the version number,
whether GDTSETUP was loaded from disk or from Flash-RAM:
"
R
" for GDTSETUP loaded from the Flash-RAM after switching on the computer
"
D
" for GDTSETUP loaded from Disk, i.e., under MS-DOS.
Loading GDTSETUP with <CTRL><G> from the Flash-RAM is very comfortable since no op-
erating system is required to carry out the configuration and setup works.
On the other side, loading GDTSETUP from disk (i.e., under MS-DOS) becomes necessary
for tasks like partitioning or enabling a totally disabled GDT BIOS (which includes
GDTSETUP).
//
66SSHHFFLLDDOO..HH\\VVLLQ
Q**''7766((778833
&XUVRUNH\V
n
DQG
p
Used to select a menu option or command. If a Microsoft-compatible mouse and a mouse
driver are installed, you can also make your choices with the mouse.
(17(5!NH\
Confirms a choice, entry, warning or message in GDTSETUP.
(6&!NH\
Exits the current menu.
63$&(!EDU
Multiple selections, or toggling between a number of preset options.
)XQFWLRQNH\)!
This key has different functions, depending on the menu you are in:
a.
Toggle between Express or Enhanced Setup.
b.
Display drive configuration.
)XQFWLRQNH\)!
To
Lock
and
Unlock
removable media.
)XQFWLRQNH\)!
Refresh Information.
When GDTSETUP is loaded, the main menu appears as shown below:
