Adaptec 2940UW PRO, Руководство пользователя, Страница: 28 / 38

18
SCSI Card 2940UW Pro User’s Reference
Advanced Configuration Options
Note:
Do not change the Advanced Host Adapter Settings
unless absolutely necessary.
■
Reset SCSI Bus at IC Initialization —When set to Enabled , the
SCSI card generates a SCSI bus reset during its power-on
initialization and after a hard reset.
■
Display <Ctrl> <A> Messages during BIOS Initialization —
When set to Enabled , the SCSI card BIOS displays the Press
<Ctrl> <A> for SCSISelect (TM) Utility! message on your screen
during system bootup. If this setting is disabled, you can still
invoke the SCSI
Select utility by pressing <Ctrl> <A> after the
SCSI card BIOS banner appears.
■
Extended BIOS Translation for DOS Drives > 1 GByte —
When set to Enabled , provides an extended translation scheme
for SCSI hard disks with capacities greater than 1 GByte. This
setting is necessary only for MS-DOS 5.0 or above; it is not
required for other operating systems, such as NetWare or
UNIX. The extended translation scheme supports hard disks as
large as 8 GBytes.
To partition a hard disk larger than 1 GByte controlled by the
SCSI card BIOS, use the MS-DOS
Fdisk command.
Caution:
Back up your hard disk before changing the
translation scheme.
■
Verbose/Silent Mode —When set to Verbose, the SCSI card
BIOS displays the host adapter model and <Crtl><A> message
on the screen during system bootup. When set to
Silent , the
message will not be displayed during bootup. The default
setting is
Verbose .
■
Host Adapter BIOS (Configuration Utility Reserves BIOS
Space)
—Enables or disables the SCSI card BIOS.
■
Set to Enabled if you boot from a SCSI hard disk connected
to the SCSI card.