Adaptec 2940UW PRO, Руководство пользователя, Страница: 15 / 38

5
Troubleshooting
■
If the driver is listed but has as exclamation mark (!) inside
a yellow circle, the software driver may be in conflict with
other hardware using the same resources. Double-click the
icon to see the device status and possible solutions.
■
If the driver is listed but has an “X” inside a red circle, the
SCSI Card 2940UW Pro software driver is disabled and is
not loading (see below).
■
If the SCSI Controller icon or the SCSI Card 2940UW Pro
software driver is not listed, reinstall the driver (see below).
Note:
Software upgrades (including downloadable drivers)
for Adaptec products are available on the Adaptec Web Site
at
http://www.adaptec.com .
An “X” inside a red circle appears with the SCSI Card 2940UW Pro
software driver in Device Manager. What does this mean?
The SCSI Card 2940UW Pro software driver is disabled and is not
loading. To enable the driver
1
Double-click the SCSI Card 2940UW Pro software driver in
Device Manager.
2
Under the General tab, check the Original Configuration
(current) box.
What if there is no SCSI Controller icon under Device Manager, or the
software driver for the SCSI Card 2940UW Pro does not appear under
Device Manager?
If the SCSI Controller icon or the software driver do not appear
1
Double-click the Add New Hardware icon in Control Panel.
2
Select Yes on the second screen of the Add New Hardware
Wizard to have Windows search for the SCSI Card 2940UW
Pro.
3
Follow the onscreen instructions.
If Windows 95 does not detect the SCSI card, run the Add New
Hardware Wizard again:
1
Double-click the Add New Hardware icon in Control Panel.
2
Select
No
on the second screen of the wizard.