Adaptec 2110S - SCSI RAID Controller Скачать руководство пользователя страница 103

Страница: 103 / 158

9-5

Managing

Controllers

period. Once the reconditioning cycle is complete, the cache is
restored to its original settings.

Click

The battery icon changes from its normal icon

(just a

battery) to its reconditioning icon

(battery with a lightning

bolt).

Once the reconditioning cycle is complete, the battery icon
changes back to the normal version.

Testing the Alarm on the Controller

If your controller has an alarm installed, you can test it to make sure
it is working.

To test the alarm on the controller:

In the System Browser window, select the controller you want
to test.

Click

Properties

The Controller Properties dialog box appears.

Click the

Battery/Alarm

tab.

Click

Test Alarm

You should hear the alarm sound if it is present on the
controller. If no alarm is present on the controller, Storage
Manager Pro displays a message box stating that the alarm is
not supported.

To turn the alarm off:

In the System Browser window, select the controller that is
sounding the alarm.

Click

Silence Alarm

in the Command Buttons pane.

Storage Manager Pro turns the alarm off.

Содержание 2110S - SCSI RAID Controller































































































































































Результаты поиска

Содержание 2110S - SCSI RAID Controller

Отзывы:

Adaptec 2110S - SCSI RAID Controller, Руководство пользователя, Страница: 103 / 158

Результаты поиска

Содержание 2110S - SCSI RAID Controller

Отзывы: