8.
Install the electrical wiring for the
SPEEDY-LIFT
. Follow the instructions found in the attached
document entitled:
ELECTRICAL INSTALLATION FOR SPEEDY-LIFT
.
9.
Power the
SPEEDY-LIFT
all the way out. Attach the wheelchair hook and support assembly
SP700
to
the head of the
SPEEDY-LIFT.
The hight of the hook assembly may be ajusted depending on the
hight or tyle of wheel chair. Remove the plastic housing covers.
10.
The stop up and stop down height may be ajusted using the bolts in the slotted holes on the up down
gear.
NOTE:
stop up bolt is pre ajusted for maximum travel.
STOP UP
STOP DOWN
