Adam Sub2100, Руководство по эксплуатации

Страница: 6 / 32

6
2.1 Important Information for set up
After having unpacked your subwoofer, please allow the system to acclimate to
the temperature of the room for approximately an hour.
The subwoofer should be positioned on a firm ground.
We recommend retaining the original packaging, as it is the best way to
guarantee safe transportation should the need to do so arise.
Please note that the subwoofer will take some break-in time to achieve optimum
sonic performance.
2.2 Quick Start
a) Before connecting the Sub2100 to your audio components and the power source
make sure that the subwoofer, the satellite speakers and your audio source are
switched off and set the level controls to minimum.
b) Choose your preferred connection as described under 3.
c)
Check if the specified voltage matches the voltage of the power supply you use.
If this is not the case do not connect the loudspeakers to a power source! Please
contact your local dealer or national distributor.
If the voltages match, use the included power cables to connect the loudspeaker
to the AC sockets.
d)
Turn on your audio system and start your source of music.
e) Switch on the main on/off switch on the rear panel of the subwoofer and the
main switches of the satellite speakers where required.
f) Turn up the volume levels of your audio system and of your satellite speakers
carefully.
g)
Adjust the Sub Level on the rear panel of the subwoofer to your liking.
2. Quick Start