15TBX100
Subwoofer
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
35 – 1500 Hz response
96 dB sensitivity
Aluminium demodulating ring allows a very low distortion figure
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Specification
Nominal Diameter
380 (15) mm (in)
Nominal Impedance (1)
8 Ohm
Minimum Impedence
6.2 Ohm
Nominal Power Handling (2)
1000 W
Continuous Power Handling (3)
2000 W
Sensitivity (1W/1m) (4)
96 dB
Frequency Range
35 - 1500 Hz
Voice Coil Diameter
100 (4) mm (in)
Winding Material
Copper
Former Material
Glass Fibre
Winding Depth
25 (1) mm (in)
Magnetic Gap Depth
12 (1/2) mm (in)
Flux Density
1.1 T
Thiele & Small Parameters
Fs
35 Hz
Re
5.1 Ohm
Qes
0.3
Qms
5.2
Qts
0.28
Vas
113 (3.8) dm3 (ft3)
Sd
855 (132.5) cm2 (in2)
Eta Zero
1.95 %
Xmax
+/- 9 mm
Xvar
+/- 11 mm
Mms
163 g
Bl
25.5 Txm
Le
1.6 mH
Mounting and Shipping Info
Overall Diameter
393 mm (15.5 in)
Bolt Circle Diameter
374 mm (14.7 in)
Baffle Cutout Diameter
354 mm (13.9 in)
Depth
181 mm (7.1 in)
Flange and Gasket Thickness
16 mm (5/8 in)
Net Weight
12.3 kg (27.1 lb)
Shipping Weight
13.9 kg (30.6 lb)
Shipping Box
420x420x200 mm
(16.5x16.5x7.9 in)
1
For different impedances, please ask.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms
Nominal Impedance
