Adam CBC 3M, Руководство по обслуживанию

Страница: 15 / 24

© Adam Equipment Company 2007
13
The display will tell you to add weight to the scale: “
LoAd
” “
04
” “
kiloS
”
Add the weight shown, wait for stability then press the [Tare] key.
The display will show “
SPAn
” “
PASS
” if the calibration is OK. Or it will show “
SPAn
” “
FAIL
” if
calibration could not be completed correctly.
The display will then show “
JP
” “
On
” indicating the jumper is still in place. Remove the
weight. Switch off the scale and switch it on again to continue with the other Service
parameters.
8.2.2
F2
-RESOLUTION
NOTE: This value can not be changed for the CBC-M scales.
8.2.3
F3
– CAPACITY
To enter this parameter, press the [Tare] key when “
F3
” is shown.
The display will show the current capacity.
Press the [U.Wt./Units] key to change the value.
Press [Tare] to accept the displayed value.
NOTE: The scale must be originally built for the capacity selected. The 3kg unit uses the
5kg load cells, 6 kg unit uses 10kg load cells, the 15 kg unit uses 20 kg load cells and the
30 kg unit uses 35 kg load cells.
Press [Zero] to return to weighing.