Adam CBC 3M, Руководство по обслуживанию

Страница: 14 / 24

© Adam Equipment Company 2007
12
8.2 USING “2006” TO ENTER THE SERVICE PARAMETERS
After the jumper has been placed in the position shown, apply power to the scale.
The display will ask for a code number, “
Pn
“ on the Weight Display.
Enter the number 2006 when “
Pn
“ is displayed and then press [Tare].
The displays will show the first parameters, called “
F1
” “
CAL
”.
To select another parameter press the [U.Wt./Units] key to advance through the
parameters.
Press the [Tare] key to enter a parameter.
To exit a parameter, press the [Zero] key.
The Weight window will show the parameter number and the Unit Price and Count
windows will show the word describing the function.
When a parameter is entered by pressing the [Tare] key, the displays will guide you
through the parameter selected and the options available.
The parameters available are:
“F1”
“
CAL”
To enter the Calibration
“F2”
“
rES”
Resolution selection
“F3”
“
CAPA”
Select capacity
“F4”
“
init” “ZEro”
Initial Zero Range
“F5”
“
rE” “ Zero”
Re-Zero range
“F6”
“
SCSivE” “ tArE”
Successive Tare Enable
“F7”
“
Ad” “CoUnt”
Display the A/D counts
“F8”
“
Zero”
Select the zero mode
“F9”
“
Pin”
To set the password
“F10”
“
Lvd” “mode”
Low voltage detection
8.2.1
F1
-CALIBRATION
To enter the calibration parameter, press the [Tare] key when “
F1
” is displayed.
The display will instruct you to remove any weight from the scale, “
UnloAd
”. Press [Tare] .