Adam ADAM-3600-C2G, Руководство пользователя

Страница: 48 / 60

ADAM-3600 Series User Manual 40
4.2.6.2 Network Function Setting
The ADAM-3600-C2G supports wired and wireless network connections to communicate with
other devices. User has to configure the network environment in this section.
Cable Network Settings
The ADAM-3600-C2G has two Ethernet ports and users can configure them respectively.
Under the concomitances that Ethernet ports supports IPv4 and IPv6, users can set RTU as
DHCP or fixed IP.If users select RTU as DHCP mode, RTU will provide a default IP address
when not getting an IP address.
Figure 4.29 Wired Network Settings
Wireless Network Settings
In the Wi-Fi setting section, users have to input an SSID to join the network. For the network
security, there are three mechanisms available:
Open : No password needed, the RTU will auto connect to the Wi-Fi network.
WEP : A kind of network encryption. Need password, check the password of connected Wi-Fi
Access Point.
WPA/ WPA2 PSK : A kind of advanced network encryption. Need password, check the pass-
word of connected Wi-Fi Access Point.
Figure 4.30 Wireless Network Settings