NB PERFORMANCE OF UNAUTHORIZED MODIFICATIONS TO
“ADAM PUMPS” AUTOMATICALLY VOID WARRANTY OF ANY AND
ALL RESPONSIBILITY ‘CIVIL AND CRIMINAL CHARGE OF THE
SAME.
GENERAL DESCRIPTION
INSTALLATION & OPERATION
MAINTENANCE & REPAIR
PARTS LIST
Read and understand this Operating Manual before starting
installation, maintenance or repair.
GENERAL DESCRIPTION AND ALLOWED USE
This diesel transfer system is designed for the delivery of diesel fuel
(also for heating fuel and antifreeze) to vehicles and equipment from
an open surface storage tank. The pump is a self priming, positive
displacement, rotary vane machine which operates on 12V DC power
(models for 24V DC power are available), and delivers a flow of
approximately 40 litres per minute. The pump has a built-in bypass
valve that keeps the operating pressure below 1.3 Bar (18 psi). The
motor has a 30 minute duty cycle.
SAFETY PRECAUTIONS AND FORBIDDEN USE
Improper use or installation of this product can
cause serious bodily injury or death!
• Not for use with gasoline, alcohol, or other liquid
with a flash point below 40°C (104°F)
• Not for use in hazardous locations.
• Not for use with fluids thicker than diesel fuel.
• Not for use to transfer fluids into an aircraft.
• Not for use with fluids for human consumption.
• Not for dispensing water.
• Not for continuous duty applications.
EC COMPLIANCE STATEMENT
ADAM PUMPS ITALIA SPA, Via della Resistenza, 46/48,
41011 Campogalliano (Modena) - Italy, states.This system has been
designed for stocking, transport and transfer of diesel fuel for vehicles
or machines (see forbidden use paragraph). The flow comply with
the Directive for Machines 89/392/CEE (91/368/CEE, 93/44/CEE,
93/68/CEE), 89/336/CEE (93/68/CEE), 73/23/CEE, and with stand-
ards EN 60529, EN 60204-1, EN 55081-2. The TECH TANK system
has been designed following total exemption normative 1.1.3.1C
ADR. Declaring that the pump EN 55011C/.A, D.L. 277/91 and
AC Tech 40, conforms to the harmonized EN 60529, EN 60204-1,
EN 50081-2, EN 55011C/.A, DL 277/91. This document has been
signed by:
Mr. Bernard Gilson, Via della Resistenza, 46/48,
41011 Campogalliano (Modena) - Italy, Phone +39 059 528128,
Fax +39 059 528437who has full legal authority to represent the firm
in the European Community. Dated, 1st of February 2008.
Machine Identification - Label (typical example)
This Operating Manual should be considered as part of the
machine. When the machine is sold, it must be transferred
to the new owner.
ADAM PUMPS Italia Spa
Via della Resistenza 48
41011 Campogalliano
Modena Italy
Code : 2108510020802
ELETTR. KPT 12-40 FLT 25 CASS. PL. ROSS
12 Volt - 270 Watt - 18 A - 2800 r.p.m.
30 min. duty cycle
Weight Kg.: 4
Manufacturer
Production
date
Product code
Model
Technical
data
2 0 0 6
N O V
