DI - FLOW IN LINE• ADAM PUMPS
2
1. G���R�� ����R�
1.1 ���R�DU������
This flow meter has been designed for mea-
suring the transfer of Diesel, AddBlue® depen-
Diesel, AddBlue® depen-
ding of purchased model. It is not to be used to
It is not to be used to
measure for resale purposes.
NOTICE: ANY MODIFICATION TO THIS ME-
TER WITHOUT “ADAM PUMPS” WRITTEN
PERMISSION WILL VOID ANY GUARANTEE
AND FREE “ADAM PUMPS” FROM ANY
RESPONSIBILITY��
1.2 F�R�W�RD
This manual has been made to give the user a
general knowledge about the equipment and
the necessary maintenance and ope-ration
instructions. Carefully read and understand
this manual before starting installation, main-
tenance or repair. Maintenance schedules
proposed in this manual are meant to be the
minimal required for efficiency, safety and en-
durance of the equipment in normal operating
conditions. Be observant for any type of mal-
function or potential safety issue at all times.
Disconnect electrical power before removing
protective covers as prescribed by the Stand-
ard 292/2 Nov. 1992. for maintenance, repair
and general lubrication by authorized person-
nel.
1.3 �R����U�����
Improper use or installation of this product
can cause serious bodily injury or death!
To ensure safe and efficient operation, it is
necessary to read and follow each of these
warnings and precautions:
• Do NOT smoke near meter or use meter near
an open flame;
• This product should NOT be used for fluid
transfer into aircraft;
• Any type of service, maintenance, control must
be done by qualified personal.
• During maintenance operations and services,
make sure to have disconnected the power supply.
• Do not exceed the maximum pressure of 3,5 bar
1.4 G���R�� ��F��Y ��R��
Always wear a protection equipment that is suita-
ble to the operations to carry out according to the
liquid that is being used. If any doubt review the
product safety sheet. During installation, use and
maintenance always wear the correct protection
equipment:
- gloves
- glass
- shoes
- clothings
1.5
DISCARDING AND RECYCLING
The metallic parts must be separated and sent
to appropriate metal recycling mills.
The fuels in the tanks of the installation will be
collected and sent to an authorized disposer.
All plastic and non-degradable material parts
will be separately collected and sent to an au-
thorized disposer or recycler.
In conformity with the European Directive 2002/96/
EC concerning the elimination of electric and elec-
tronic equipments, (WEEE), the symbol herewith on
the pump and/or on its packaging indicates that
you have to dispose of packaging for the product
in a responsible manner. It is suitable for recycling.
Help to protect the environment, take the packag-
ing to the local recycling service and place into the
appropriate recycling bin.
Never dispose of electrical equipment or batteries
in with your domestic waste. If your supplier offers
a disposal facility please use it or alternatively use
your local recycling service and dispose in the cor-
rect manner. This will allow the recycling of raw ma-
terials and help protect the environment.
