EN
© Adam Equipment Company 2012
6
700660229revA-Jul12
5.0
BASIC
OPERATION
5.1
SWITCHING
THE
BALANCE
ON
Plug in the unit using the adapter or use the internal rechargeable battery. It is
recommended that you charge the battery for at least 8 hours before first use.
1)
To turn on press the
[On/Off]
key once and release. The scale will show
the software revision, the battery voltage, and then a self-test before
showing the stable sign and zero weight on the display.
2)
The scale can now be used.
3)
To turn the scale off after use press the
[On/Off]
key again. There is an
auto power-off function that will automatically turn the unit off if not
used for a period of time. This can be set in the parameters section 6.0.
5.2
ZEROING
You can press the
[Zero]
key to set a new zero point and show a zero reading.
This may be necessary if the weight reading is not indicating zero with nothing
on the platform, and should be done if required before each new weighing
takes place. The zero indicator will show up in the upper left corner of the LCD
when the scale displays Zero.
5.3
WEIGHING
UNITS
To change the displayed weighing unit, press the
[kg/lb]
key which will then
cycle you through the available options of weighing units. This can only be done
before or after a weighing takes place.
5.4
HEIGHT
UNITS
To change the displayed height measuring unit, press the
[cm/ft]
key which will
then cycle you through the available options of height measuring units. This
can only be done before or after a weighing takes place.
