EN
© Adam Equipment Company 2012
10
700660229revA-Jul12
6.2
SETTING
AUTO
OFF
F2
F2
F2
F2
OFF
OFF
OFF
OFF
An automatic power down time can be set so that the MUW turns off after a
period where no activity is detected. This preserves the life time of the battery
when used in this mode.
Settings are OFF, 5, 10, 20, and 30 minutes.
1) Switch on the scale then press the
[kg/lb]
key during the self-checking
test of the display.
2) The display will show the first function
F1
F1
F1
F1
EL.
EL.
EL.
EL.
3) Press the
[kg/lb]
key to select
F2
F2
F2
F2
OFF
OFF
OFF
OFF
and then
[Zero]
to enter and
show
the current setting, default is
10.
4)
Press the
[Print]
key to change the setting for the backlight and press
[Zero]
to save, then
[kg/lb]
to select the next parameter.
6.3
SETTING
THE
PRINTING
CONTROLS
FFFF3
3
3
3
SE
SE
SE
SE
R
R
R
R
The MUW can be set to automatically print “AUTO”, or print on demand “PrN”
by pressing the
[Print]
button.
The data transmission speed “Bps” of the MUW must match that of the Printer
or other device being used to collect data information successfully.
The printing control and speed can be selected as follows.
1) Switch on the scale then press the
[kg/lb]
key during the self-checking
test of the display.
2) The display will show the first function
F1
F1
F1
F1
EL.
EL.
EL.
EL.
3) Press the
[kg/lb]
key to select
FFFF3
3
3
3
S
S
S
S
ER
ER
ER
ER
and then
[Zero]
to enter and show
the current printing control setting “UArt”.
4) Either printing on demand (PrN), pressing the
[Print]
key following a
weighing, or printing automatically (AUTO), automatically prints out
when a stable reading and BMI calculation is displayed can be selected.
