© Adam Equipment Co Ltd 2018
7
2.2
SETTING UP THE SCALES
1) Place the stainless steel platform (supplied separately) into the receptacles on the top
cover.
2) Do not press with excessive force as that could damage the load cell inside.
3) If an optional scoop has been supplied, place it on top of the platform.
4) If an optional display on Pillar is supplied, install the pillar into the socket at the rear of
the scale by carefully pushing the cable inside the pillar rod. Use 2x M4 screws to
secure.
5) Level the scale by adjusting the four feet until the spirit level bubble is in the centre of
the level and the scale is supported by all four feet.
6) Turn the power ON by pressing the power button on the keypad.
7) The unit will display the software revision number in the
Weight
window and count down
to zero while performing a self-test.
8) When ready all three displays will show zero.
2.3
DISPLAY WINDOWS
The window for the
Weight
has arrows to indicate when the scale is at zero or if the scale is
displaying a net weight (if a tare value has been entered). It also indicates when the scale is
stable.
The window for the
Unit Price
has arrows to show when the Auto Clear function is active and
if the unit price is per 100g or per kilogram
Pillar Attachment
Mains connection
USB connectivity port
