24 |
P a g e
© Adam Equipment Company 2010
If output on demand is selected, the user may optionally configure the serial output
as a choice of 3 styles of form, either in a default format or in one of two custom
formats. Each of the custom formats can be configured to output up to 15 lines of
data. The data types that can be printed are:
NAME
TEXT PRINTED
ID number
ID no.: xxxxxxxxxxxx
Serial number
Serial no. xxxxxxxxxxxx
Date
DATE dd/mm/yyyy
Time
TIME hh:mm:ss
Net weight
Net: xxx.xxx g
Gross weight
Gross: xxx.xxx g
Tare weight
Tare: xxx.xxx g
Unit weight
Unit wt: xxx.xxx g
Count
Count: xxxx pcs
Reference weight
Ref. wt: xxx.xxx g
Percent
Percent: xx.xxx %
Checkweigh lower limit
Low: xxx.xxx g
Checkweigh upper limit
High: xxx.xxx g
A blank line printed
<CR><LF> only.
Any of these can be printed on any of the 15 lines available. Not all items need to be
used and any one can be used more than once.
The data for each form will be preceded by a start-of-header <SOH> character (01)
and terminated with an end-of-transmission <EOT> character (04). These characters
will be ignored by a serial printer but will allow a computer program which reads the
data to distinguish between this block report format and the single-line output
format described above.
