© Adam Equipment Company 2009
Page 10
Rev C3, June 2008
7.0 User Parameters
This indicator has 4 parameter settings that can be selected.
1.
When the scale is in normal weighing mode, press and hold down the
[ON / OFF]
key and the
[UNIT]
key for 3 seconds until ‘
SEtUP
’ is shown on the display.
2.
When in the SETUP mode, press the
[Print/Hold]
key to change the flashing
digits, and
[TARE]
key to confirm the flashing digits and move to the next
parameter setting. Press the
[ON / OFF]
key to exit the set up mode.
3.
Parameters setting summary:
Parameter
x/xy Factory Set
Setting
A.o.t.
00-15
05
Auto-off time:
No auto-off = 00.
01-15 minutes auto-off time.
P.H.
0,1,2
1
0 = Only Print Function
1 = Only Hold Function
2 = both HOLD and PRINT function (pressed
down less 3s,this key works as Print
function; pressed down more than 3s,this
key works as HOLD function)
H.t
0-4
0
Hold work time:
0 = no time limit.
1 = 10 seconds
2 = 30 seconds
3 = 60 seconds
4 = 120 seconds
S.F.
0-3
0
0 = No RS232 Function.
1 = Continuously outputs display data.
2 = Output display data when PRINT pressed
3 = Bi-directional communication (the scale
receives and executes commands from the
HOST device)
