Adam Equipment MCW-250 L, Руководство по обслуживанию

Страница: 10 / 16

© Adam Equipment Company 2006 8
8.0 WARNING
•
Do not dismantle the chair-weigher without following the necessary
instructions.
•
Do not jump while standing on the load-bearing board. This may damage
the sensor inside.
•
Do not move the chair-weigher violently and abruptly. It is recommended
to move and put down the chair-weigher gently.
•
It is suggested to wipe the stains with soft cloth soaked with detergent and
to wipe later with soft cloth too. Do not use organic solutions and boiled
water to wipe the stains. Do not use water for cleaning.
•
Keep the chair-weigher in a dry and clean environment. Do not expose it
outdoor or use it in locations near fire, under direct sunshine or with high
temperature.
•
The [On/Off] key on the screen board only switches off the screen power
instead of the entire power to the chair-weigher. Therefore, it is necessary
to switch off the main power supply when the chair-weigher is not in use
for a long time. Otherwise the battery may be damaged as a result of
over-discharge of electricity.