Adam Equipment HIGHLAND HCB1002, Руководство пользователя

Страница: 19 / 120

© Adam Equipment Company 2014 17
9520revF-Jun14
8 n 1 8 data bits, no parity
7 E 1 7 data bits, even parity
7 0 1 7 data bits, odd parity
Press the
[Mode]
key to change the setting. Press
[Tare]
to confirm and move
to the next parameter.
9) Format settings. The scale will print either using a format that includes
stability indications or one with only the weight. There are 2 settings that the
Highland can work with as follows:
FOr 1 Data format is with line headings and
extra line feeds as shown in section 9.3
FOr 2 Data format is weight only
Press the [Mode] key to change the setting. Press [Tare] to confirm and move
to the next parameter.
10) The display will go back showing F3 SEr. Press the [Print] key to return to
weighing or press
[Mode] to go to the next function.
6.4 AUTO POWER OFF
The auto power off function helps conserve power, when using the internal
rechargeable battery or AC adapter. The Auto switch-off time may be set up by the
user.
1) To set this parameter press the [Mode] key during self-checking test when
turning on the balance.
2) After a few seconds, the display will show the first function F1 UNT .
3) Keep pressing the [Mode] key until F4 oFF is displayed.
4) Press the
[Tare]
key to view the current settings.
5) Press [Mode] to change the settings (0, 5, 10, 20 and 30 minutes).
6) Press
[Tare]
to store a particular setting. The display will return to
F4 oFF