6
|
P a g e
© Adam Equipment Company 2013
7.0 TROUBLE
SHOOTING
7.1
ERROR
MESSAGES
If an error message is shown, repeat the step that caused the message. If the error
message is still shown then contact your dealer for support.
ERROR
CODE
DESCRIPTION
POSSIBLE CAUSES
O-Ld
Overload
Remove weight from the pan. Make
sure the machine is reading zero
before weighing. Do not over load
the pan. If the problem recurs
calibrate. Possible damage to the
internal weighing cell.
OUt2
Out of Zero reading
Make sure the pan is fitted correctly.
Make sure nothing is touching the
pan when turning on the unit.
Calibrate the machine. Possible
damage to the internal weighing cell.
UnSt
Unstable
Make sure the balance is on a flat
surface and away from vibration.
Possible damage to the internal
weighing cell.
LO
or
Low Battery indicator
Change the batteries or use on the
power adapter.
ErrE
E-Prom error
Software error turn off and restart.
Contact Adam Equipment or your
dealer for further assistance.
No Power when turning on
Change the batteries or use on the
power adapter.
7.2
REPLACEMENT
PARTS
AND
ACCESSORIES
If you need to order any spare parts and accessories, contact your supplier or Adam
Equipment. A partial list of the more common items follows:
Part Number
Description
9402
AC adapter
(Country Dependent)
9401
Plastic pan
