Adam Equipment CPWplus 15, Руководство пользователя

Страница: 22 / 28

11.0 TECHNICAL PARAMETERS
The technical parameters allow the scale to be adjusted to meet the operator’s
requirements for accuracy and speed.
•
Switch off the scale.
•
Hold the [Unit] key and then press [On/Off] momentarily. Release
the [Unit]] key. The display shows the first function “
F1 x
” i.e.,
Filtering.
•
To escape from the parameter setting at any time press the
[Print/Hold] key.
•
To scroll through the parameters, press the [Unit] key (which will
advance to the next parameter).
•
To return to normal weighing, turn the scale off and back to on again
or press the [Print/Hold] key.
11.1 FILTER
This parameter is used to set the speed of the display filtering. For poor
environments the filter should be set at its slowest to minimise external
influences on the scale. For weighing small samples or gradual filling the filter
should be set at faster setting. The display will show “
Fi 1
” to “
Fi 3
”.
•
Press [Tare/Zero] to scroll through the settings. If it is set to “
F1 1
”
then the display is at its slowest setting and at “
F1
3 ” the display is in
its fastest setting.
•
Press [Unit] to confirm the selection and move to the next
parameter.
20
© Adam Equipment Company 2006