Adam Equipment CPWplus 15, Руководство пользователя

Страница: 12 / 28

6.3 TARING THE SCALE
•
Zero the scale by pressing the [Tare/ Zero] key if necessary. The
zero indicator will be on.
•
Place a container on the platform, a value for its weight will be
displayed.
•
Press the [Tare/Zero] key to tare the scale. The weight that was
displayed is stored as the tare value and that value is subtracted
from the display, leaving zero on the display. The indicator “
Net ” will
be on.
•
As a product is added only the weight of the product will be shown.
The scale could be tared a second time if another type of product
was to be added to the first one. Again only the weight that is added
after taring will be displayed.
•
When the container is removed a negative value will be shown. If the
scale was tared just before removing the container, this value is the
gross weight of the container plus all products those were removed.
The zero indicator will also be on because the platform is back to the
same condition as it was when the
[Tare/Zero] key was pressed
last.
Note: If the capacity of the scale is 6000g and a container weighing
1000g is used and tared, the scale can then be used to weigh
material of up to 5000g only.
6.4 WEIGHING
•
When the scale is at zero, place an item to be weighed on the
platform. The display will show the weight. The unit will be shown in
kilograms unless the user has selected either pounds, ounces or
pounds-ounces previously.
•
If a container is used, this can be tared out as described in 6.3 on
“Taring the scale”. Then material can be added to show the net
weight.
10
© Adam Equipment Company 2006