Adam Equipment CBC SERIES, Руководство пользователя

Страница: 13 / 28

© Adam Equipment Company 2009
11
by re-calculating it. To lock the Unit Weight and avoid re-
sampling, press
[U. Wt./Units] .
•
If the scale is not stable, the calculation will not be completed. If
the weight is below zero, the “ Count ” display will show negative
count.
B. Entering a known Unit Weight
•
If the unit weight is already known then it is possible to enter that
value using the keypad.
•
Enter the value of the unit weight in grams, using the numeric
keys followed by pressing the [U. Wt./Units] key. The " Unit
Weight " display will show the value as it was entered.
•
The sample is then added to the scale and the weight will be
displayed as well as the quantity, based on the unit weight.
6.3.2 Counting more parts
•
After the unit weight has been determined or entered, it is
possible to use the scale for parts counting. The scale can be
tared to account for the container weight as discussed in the
earlier section.
•
After the scale is tared the items to be counted are added and the
" Count " display will show the number of items, computed using
the total weight and the unit weight.
•
It is possible to increase the accuracy of the unit weight at any
time during the counting process by entering the count displayed
and then pressing the
[Smpl] key. You must be certain that the
quantity displayed matches the quantity on the scale before
pressing the key. The unit weight can be adjusted based upon a
larger sample quantity. This will give greater accuracy when
counting larger sample sizes.
6.3.3 Automatic part weight updates
•
At the time of computing the unit weight (see section 6.3.1A), the
scale will automatically update the unit weight when a sample
less than the sample already on the platform is added. A beep will
be heard when the value is updated. It is wise to check the
quantity is correct when the unit weight has been updated