Adam Equipment CBC SERIES, Руководство пользователя

Страница: 11 / 28

© Adam Equipment Company 2009
9
•
If a preset count has been stored the " Preset " or symbol as
above, will have an arrow above.
5.3 COUNT DISPLAY
•
This display will show the number of items on the scale or the value
of the accumulated count. See the next section on OPERATION.
•
The arrow indicator will be seen above " Memory " when a value has
been entered into the memory.
6.0 OPERATION
NOTE: CBCa Scales only
SETTING THE WEIGHING UNIT, lb or kg
The scale will turn on displaying the last weighing unit selected, either
kilograms or pounds. To change the weighing unit press the
[U. Wt./Units]
key when the “ Unit Weight ” display shows zero. If necessary press the [CE]
key to clear the unit weight before changing.
6.1 ZEROING THE DISPLAY
•
You can press the [Zero] key at any time to set the zero point from
which all other weighing and counting is measured. This will usually
be necessary only when the platform is empty. When the zero point
is obtained the “
Weight ” display will show the indicator for zero.
•
The scale has an automatic re-zeroing function to account for minor
drifting or accumulation of material on the platform. However you
may need to press
[Zero] to re-zero the scale if small amounts of
weight are still shown when the platform is empty.
6.2 TARING
•
Zero the scale by pressing the [Zero] key if necessary. The
indicator above “ Zero ” will be ON.
•
Place a container on the platform and its weight will be displayed.
•
Press [Tare] to tare the scale. The weight that was displayed is
stored as the tare value which is subtracted from the display,
leaving zero on the display. The indicator above “
Net ” will be ON.