Adam Equipment CBC 15M CBC 30M, Руководство пользователя

Страница: 10 / 24

© Adam Equipment Company 2007
8
6.2 TARING
•
Zero the scale by pressing the [Zero] key if necessary. The
indicator above “ Zero ” will be ON.
•
Place a container on the platform, a value for its weight will
be displayed.
•
Press the [Tare] key to tare the scale. The weight that was
displayed is stored as the tare value which is subtracted from
the display, leaving zero on the display. The indicator above
“
Net ” will be ON.
•
As a product is added only the weight of the product will be
shown. The scale could be tared a second time if another
type of product was to be added to the first one. Again only
the weight that is added after taring will be displayed.
•
When the container is removed a negative value will be
shown. If the scale was tared just before removing the
container, this value is the gross weight of the container
plus
all products those were removed. The indicator above “
Zero
”
will also be ON because the platform is back to the same
condition as it was when the
[Zero] key was pressed last.
6.3 PARTS COUNTING
6.3.1 Setting Unit Weight
In order to do parts counting it is necessary to know the average weight
of the items to be counted. This can be done by weighing a known
number of the items and letting the scale determine the average unit
weight or by manually inputting a known unit weight using the keypad.
A. Weighing a sample to determine the Unit Weight
To determine the average weight of the items to be counted, you
will need to place a known quantity of the items on the scale and
then to key in the number of items being weighed. The scale will
then divide the total weight by the number of items and display the
average unit weight. Press
[CE] anytime to clear the unit weight.
•
Zero the scale by pressing the
[Zero]
key if necessary. If a
container is to be used, place the container on the scale and
tare by pressing
[Tare] as discussed earlier.