© Adam Equipment Company 2007
7
3.4 UNIT SELECTION
•
The indicator can be set for different units by pressing the
[Unit]
key. The options are kilogram, gram, tonne, pound and ounce.
They can be enabled as needed (see section 6.2). Kilogram is
always on.
3.5 WEIGHING
•
Place the sample on the scale platform. The weight will be
displayed in the selected Unit.
•
Wait till the stable indicator is on for accurate weighing.
3.6 CHECK WEIGHING
Check-weighing is a procedure to sound an alarm when the weight of the
sample on the scale meets or exceeds the pre-set Low and High values
stored in memory, by using the
[Mode]
key.
To set the High and Low values, follow the procedure given below-
•
Press the
[Mode]
key. The display will show “
000.00 HI
” with the
first digit flashing for setting the High value. Use the
[Unit]
key to
advance, the
[Tare]
key to change the value of the flashing digit.
Press
[Mode]
again to confirm the value.
•
Press the
[Mode]
key again. The display will show “
000.00 LOW
”
with the first digit flashing for setting the High value. Use the
[Unit]
key to advance, the
[Tare]
key to change the value of the
flashing digit. Press
[Mode]
again to confirm the value.
•
Press
[Mode]
once again to return to normal weighing.
•
Once the check weighing Limits are set and the alarm function is
active, a beep will sound slowly when the sample weight is below
the Low Limit. The beep will sound quickly if the weight is above
the High Limit. If the sample weight is in between the Limits, the
beep does not sound.
Содержание BFW 150
Страница 2: ...Adam Equipment Company 2007 2...
