5
D - Attaching the Pump and Cords
(1) The pump is already plugged into the light bar at the top of the water feature.
The hose should already be
attached to the water distribution unit at the top of the water panel and the pump.
(2) Make sure the hose has not come undone or kinked during shipping.
(3) Plug the electrical cord in to the light bar at the top.
If you have an outlet behind the feature drop the power
cord down behind the water surface (under the hood back that attaches to the wall) and plug it in to the wall outlet. If
you do not have an outlet behind the feature send the power cord down one of the hollow frame pieces on either side.
It will come out the bottom and allow you to plug it in.
E - Install the Water Feature on the Mounting Bracket
Hang the water feature on the wall mounted bracket.
Use the clips on the bracket and the square holes on the
water feature. Push down gently until the water feature in snug on the clips and hanging level, as shown below.
F - Pebbles and Water
If you have not already reinstalled the pebble shelf you may do so now, and secure it with the screw.
(1) Carefully set the pebbles on the shelf.
Please be sure that none of the pebbles rest against the water surface, as it
may cause splashing.
We recommend always using distilled water. Distilled water will help prolong the life of
your water feature and make it much easier to maintain
.
(2) Now you can fill the water tray.
When filling/refilling your
water feature we always recommend slowly pouring the water
directly on the water surface. Make sure to keep the water filled
above the pump and no higher than the water fill line on the warning label. Do not
fill the feature while it is running as this can lead to overfilling the liner. Overfilling
the liner forces water between the liner and the tray and can cause the tray to appear
as if it is leaking.
Содержание Water Features
Страница 1: ......
