Adafruit Industries Feather 32u4 Adalogger Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 40

Adafruit Industries Feather 32u4 Adalogger Скачать руководство пользователя страница 25

Once done click OK to save the new preference settings. Next we will look at
installing boards with the Board Manager.

Now continue to the next step to actually install the board support package!

Using with Arduino IDE

Since the Feather 32u4 uses an ATmega32u4 chip running at 8 MHz, you can pretty
easily get it working with the Arduino IDE. Many libraries (including the popular ones
like NeoPixels and display) work great with the '32u4 and 8 MHz clock speed.

Now that you have added the appropriate URLs to the Arduino IDE preferences, you
can open the Boards Manager by navigating to the Tools->Board menu.

Once the Board Manager opens, click on the category drop down menu on the top
left hand side of the window and select Contributed. You will then be able to select
and install the boards supplied by the URLs added to the prefrences. In the example
below, we are installing support for Adafruit AVR Boards, but the same applies to all
boards installed with the Board Manager.

©Adafruit Industries

Page 25 of 39

«
...
23
24
25
26
27
...
»

Содержание Feather 32u4 Adalogger









































Отзывы:

Нет отзывов