9
OPERATION FROM THE REMOTE CONTROL
1. Press button (№9 pic.3) to switch on the scanning mode. First variant of
the scanning 0° will be switched on - laser dot.
2. Press button (№9 pic.3) to select the following scanning variant: 10°-45°-
90°-180°. Scanning angle will be displayed with numbers on the display
of the remote.
3. The scan mark can be moved around the perimeter. Movement is possible
only clockwise (one direction) when operating from the remote control. To
move counterclockwise direction press and hold button (№5 pic.3).
4. If to choose scan variant 180
º
, then further pressing button will switch off
the scan mode. If you press button again, scanning mode will be switched
on in the previous selected variant.
ROTATION SPEED CHANGE
The laser beam is more visible when the rotating speed is slow. The default
speed is 600 rpm.
OPERATION FROM THE TOOL KEYPAD
1. Press button (№7 pic.2) to choose the rotation speed. Indicator (№8 pic.2)
will light up. First variant of the speed will be switched on: 0 rpm - laser dot.
2. Press button (№7 pic.2) to choose next variant of the rotation speed:
120-300-600 rpm.
3. Indicator (№8 pic.2) will light off when choosing 600 rpm.
OPERATION FROM THE REMOTE CONTROL
1. Press button (№10 pic.3) to switch on the scanning mode. First variant
of the scanning 0° will be switched on - laser dot. Digit 0 will be shown on
the display.
2. Press button (№10 pic.3) to select the next variant of the rotation speed:
120-300-600 rpm. Indicator (№8 pic.2) on the tool keypad will be switched
off when choosing 600 rpm.
LASER BEAM DETECTOR
Laser detector increases the measurement range of the tool. Use the detector
when the laser beam is poorly visible, e.g. outdoor or in bright light. When
operating with the rod, set the detector on the rod with the help of mount.
1.
Sound On/Off
English
5
