4
DSTB-IPTV
GETTING STARTED - HOW TO CONNECT
ad notam DFU monitor system
Connect an HDMI cable to the HDMI output terminal of the digital set top box and one of the three HDMI inputs of
the DFU.
IR emitter LED
In order to use the integrated IR receiver of a combined DFU monitor system connect the IR emitter LED (ET_541) to
the IR output port of the DFU monitor system and glue it in front of the IR receiver eye window of the DSTB-IPTV.
Ethernet LAN
The DSTB-IPTV is equipped with an internal built-in 802.11 b/g/n Wi-Fi module. Use this port once you choose to
connect to your network via wire. Both options (Wi-Fi and Ethernet) may be (de-)activated independently within the
Settings
menu or during the
Installation Wizard
at initial setup.
External USB media source
Connect an external USB media source to one of the USB sockets in order to install a software update or to run a
media content from the USB device.
In order to have access to the USB ports also after installation, we recommend
installing USB extension cables.
USB mouse or keyboard
Connect a mouse or keyboard to one of the USB sockets to facilitate the handling of the DSTB-IPTV.
In order to have
access to the USB ports also after installation, we recommend installing USB extension cables.
