10
DSTB-IPTV
GETTING STARTED - INSTALLATION WIZARD
In order to be able to use all functions, the DSTB-IPTV
needs a connection to a network. This might be
accomplished with either a wired
Ethernet
or a wireless
Wi-Fi
connection. If you have already established a
connection
via
Ethernet
in the last step of the
Installation
Wizard
or if you
don´t want to setup a connection to a
network at all, you may skip this section by executing the
Next
button.
Wi-Fi Configuration
The DSTB-IPTV has a built-in wireless feature. To activate
it, go to
Wi-Fi
and toggle the switch in the upper right
hand corner to
ON
. The system will begin to scan for
available networks and generate an according list.
Select the network of your choice and if required, enter
the according password. Then execute the
Connect
button.
It is recommended to stay on this page until the status
changes from
Authenticating
to
Connected
.
once the
DSTB-IPTV is connected to the network, the icon in the
bottom right hand corner of the screen will show two
green monitors.
The signal bar besides indicates the
strength of the Wi-Fi signal.
