DRAINING
Essential instruction for the safety of persons and the environment
•
The water coming out of the drain valve is very hot and can cause very severe
burns. Make sure the area around the hot water flow is clear of people.
Essential instruction for the electrical safety
•
Shut down the external electrical supply of the appliance before draining.
Essential instructions for the correct operation of the system
•
Drain the tank if it is not used in winter and is at risk from exposure to ice.
If the primary circuit water contains antifreeze, only the DHW tank must be
drained. If the heating circuit does not contain antifreeze, the heating circuit
and domestic water must be drained.
•
Before draining the DHW, isolate the tank and lower the pressure of the
heating circuit to 1 bar, in order to prevent the DHW tank from being crushed.
DRAINING THE PRIMARY CIRCUIT (Figure 3)
To drain the primary circuit of the hot water heater:
1.
Stop the charging pump.
2. Isolate the primary circuit by closing the stop valves (
1
).
3. Connect the drain valve (
2
) to the sewer using a flexible hose.
4. Open the drain valve (
2
) and drain the water from the primary circuit to the drain.
5. Open the tank’s air bleed valve (
3
) to accelerate drainage.
6. Close the drain valve (
2
) and air bleed valve (
3
) after draining the tank.
DRAINING THE DHW TANK (Figure 4)
To drain the hot water heater’s DHW tank:
1.
Open fully the hot water tap (
3
) for at least 60 minutes to make sure the DHW tank has
cooled down sufficiently.
2. Close the filling valve (
1
) and the stop valve (4).
3. Connect the drain valve (
2
) to the sewer using a flexible hose.
4. Open the drain valve (
2
) and drain the water from the DHW tank to the sewer.
5. To accelerate the tank’s drainage, open a hot water tap located higher than the tank
connection in the DHW circuit.
6. Close the drain valve (
2
) and the hot water tap (
3
) after having drained the DHW tank.
BRINGING BACK INTO SERVICE AFTER MAINTENANCE
Refer to chapter "Starting Up", page 22
Smart SL : A1007846 - 661Y3100 • C
Maintenance
EN
26
Содержание SL320
Страница 5: ...ENERGY LABELLING Smart SL A1007846 661Y3100 C Product Information 5 EN...
Страница 6: ...Smart SL A1007846 661Y3100 C Product Information RATING PLATE EN 6...
Страница 27: ...Figure 3 Figure 4 4 1 2 3 Cold water Hot water 1 1 2 3 Smart SL A1007846 661Y3100 C Maintenance 27 EN...
Страница 28: ......
