ACV HeatMaster 25 C, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 36

EN • 6
664Y4500 • D
E
N
FR
R
U
P
L
DE
IT
ES
N
L
INtroDuCtIoN
workIng prIncIple
TANk-IN-TANk TECHNOlOGY
ACV Tank-in-Tank technology has been widely tried and tested and is
extremely simple and reliable.
The core of the HeatMaster® C features a ring-shaped stainless steel tank,
through which the flue tubes pass. It is surrounded by a steel shell containing
the primary fluid; this outer shell extends down to the combustion chamber
and also surrounds the flue tubes. The primary fluid is directly heated during
the combustion process and this indirectly heats the sanitary water.
Like all Tank-in-Tank cylinders, the inner cylinder is corrugated along its entire
height and is suspended in the boiler by the sanitary connections.
The heat exchange surface of the tank is much greater than that of traditional
generators. A large heat exchange surface means that the Tank-in-Tank cylinders
have a much shorter reheat time than traditional hot water boilers, thereby
minimising the volume of water stored. The higher storage temperature in the
tank is also the reason for the much higher hot water flow rates.
Heatmaster® 25 c
1. Cold water inlet
2. Auto-air vent
3. Stainless steel “Tank-in-Tank” hot water cylinder
4. Safety valve (3 bar) + pressure gauge
5. Modulating AIR/GAS premix burner
6. Domestic hot water outlet
7. Gas connection
8. Stainless steel heat exchanger
9. Heating circuit
10. Control panel
11. Expansion vessel
12. Rigid expanded polyurethane foam insulation
13. Boiler charging pump
14. Base
1
10
3
4
2
11
5
8
13
9
14
6
7
12