ACV Compact A, Каталог продукции

Страница: 14 / 27

High efficiency combination boilers 25
Technical Data
Dimensions
HeatMaster® 201
High efficiency combination boilers 24
HeatMaster® 201
Fuel Natural gas/LPG
Burner options type BG2000-M
Input - heating kW 60 to 220
Input – hot water kW 60 to 240
Output - heating kW 56.4 to 200.2
Output – hot water kW 56.4 to 218.4
Primary capacity L 241
Total capacity L 641
Heating surface area m 2 5.3
Primary circuit pressure drop mbar 240
DHW tank pressure drop mbar 190
Flue circuit pressure drop mbar 2.9
DHW connection (male BSP) Ø 2"
Primary connection (female BSP) Ø 2"
Flue connection Ø mm 250mm
Weight empty Kg 550
Weight full Kg 1191
Minimum working gas pressure mbar 20/37
Gas flow rate m 3 /h 25.4/9.81
Maximum operating temperature °C 90
Maximum operating pressure Primary: 3 bar Secondary: 10 bar
Gas connection - 1
1/4
"
High performance combined
boiler and water heater with fully
modulating burner technology.
The HeatMaster is a high performance hot water producer: its annular
Tank-in-Tank holds a volume of hot water for peak demand. This
combines the advantages of a hot water producer with integrated
storage and of an instantaneous water heater, while avoiding the
disadvantages of space, cost and efficiency.
The HeatMaster has a primary circuit and can therefore also be used as
a central heating boiler.
As with all ACV stainless steel Tank-in-Tank products, it can operate at
high temperatures.
Exceptional Performance
The MCBA electronic controller regulates the boiler (start-up, safety,
modulation), the shunt pump and the heating pump in response to
hot water and heating demand. The MCBA offers numerous advanced
features:
- A large burner modulation range - down to less than 30%
- The hot water tank is always kept at an optimum temperature
- Excellent hot water performance
- Energy efficiency is optimised in both hot water and heating modes.
Product Features
• High performance fully modulating combined boiler and water
heater
• Stainless steel Tank-in-Tank design
• Low-NOx premix natural gas/LPG modulating burner, from 60 to 220 kW
• Can also be used as a stand-alone water heater
• Anti-Legionellae: hot water stored at a consistently high
temperature
• Built-in primary circuit shunt pump
• Fully insulated with 50mm rigid polyurethane foam
• Stove enamelled casing
• Control panel including digital MCBA controller complete with self
diagnostic system and combined temperature and pressure gauge
• Up to 3534 litres of hot water at 60°C in one hour
• Vented or unvented use, with mains pressure SystemPaks available
HeatMaster®201
A 2085mm
B 300mm
C 1020mm
D 1320mm
E 1020mm
F 600mm
G 1383mm
H 590mm
2.5m 2
Operating Conditions
Cold water t° 10°C
Hot water t° 40°C
Heating water t° 90°C
Performance Data
HeatMaster® 201
Litres in first 10 minutes 40°C 1745
Litres in first 10 minutes 45°C 1489
Litres in first 10 minutes 60°C 971
Litres in first hour 40°C 6690
Litres in first hour 45°C 5667
Litres in first hour 60°C 3534
Continuous flow 40°C Ltrs/hr 6117
Continuous flow 45°C Ltrs/hr 5039
Continuous flow 60°C Ltrs/hr 2914
Reheat time at 60°C Min 23
Note: The above performances are based on the hot water being blended at point of use,
with a boiler temperature of 90°C and a domestic cold water inlet of 10°C.
JUMBO 1000
4010 L
of hot water in 10'
8955 L
of hot water in
the first hour
HeatMaster® 201